![]() |
This handy light weight deep socket wrench, manufactured from alloy steel, is slit open along the full length to accomodate the installed cable during tightening of the dome nut. The wrench encloses the dome nut on five sides giving the nut additional rigidity during tightening. This is especially important if a stiff cable is used.
* Note: Does not work with all Flex fittings. |
PART NUMBER |
WRENCH FLATS MM (IN) |
USED WITH SIZES | |
NYLON DOME NUT |
BRASS DOME NUT |
||
1.500.1400.04 1.500.1500.04 |
14 (.55) 15 (.59) |
PG 7, M12 |
PG 7, M12 |
1.500.1700.04 1.500.1900.04 |
17 (.67) 19 (.75) |
PG 9, M16 |
PG 9, M16 3/8" NPT |
1.500.2000.04 1.500.2200.04 |
20 (.79) 22 (.87) |
M20 PG 11 |
|
1.500.2400.04 1.500.2700.04 |
24 (.94) 27 (1.06) |
PG13.5, 1/2"NPT PG16, 1/2"NPT-E |
PG 16, 1/2" NPT |
1.500.3000.04 1.500.3300.04 |
30 (1.18) 33 (1.30) |
PG 21, 3/4" NPT |
PG 21, 3/4" NPT |
1.500.4000.04 1.500.4200.04 |
40 (1.57) 42 (1.65) |
PG 29, 1" NPT |
PG 29, 1" NPT |
1.500.5000.04 1.500.5300.04 |
50 (1.97) 53 (2.09) |
PG 36, 1-1/2" NPT |
PG 36, M40 |
1.500.5700.01 1.500.6000.01 |
57 (2.24) 60 (2.36) |
PG 42, M50 |
PG 42, M50 |
1.500.6400.01 | 64 (2.52) | PG 48 |